Low power high Air Flow Fans

Low power high Air Flow Fans

24.50 USD

For More Details

Fanspdf

SKU: Fans. Category: .

Product Description

A. General Specification

Item Specification Condition
Model No. D12025V12XLB-A
Outline Dimension 120 x 120 x 25 mm
Rated Voltage DC 12 V
Operating Voltage Range DC 10.8 ~13.2 V
Start Voltage DC 7 V
Rated Current 0.11(Max0.13) A +10%  At Rated Voltage,25°C, 65% RH,
Free Air
Power Consumption 1.32(Max1.56) W +10%
Rotating Speed 1500 RPM ±10%
Max. Airflow 57.2    CFM1.618  m3/min  At Rated Voltage
AMCA 210 Standard
At Rated Current
Max. Static Pressure 1.879    mmH2O
0.074   inchH2O
Noise Level 27.2(Max 31.2)    dB(A)  At Rated Voltage
Measured in a non-echo Chamber
CNS 8753 Standard
ISO 3744 Test Condition
Life 50000 hrs      at 25°C  MTTF (Mean Time To Failures)
at Confidence. Level 90%
No. of Blade 7 Blades
No. of Pole 4 Poles
Rotating Direction Clockwise View From Label Side
Weight 156 g
Motor Type DC Brushless Fan Motor
Speed Control N/A
 Signal Output N/A

B. Main Materials / Parts Specification

Materials / Parts Specification
Housing Thermoplastic PBT, UL94V-0
Blade, Bobbin Thermoplastic PBT, UL94V-0
Bearing Ball Bearing
Termination Lead Wires (+)Red, (-)Black, UL1007 AWG#24 Length:300±
10mm
Connector N/A

C. Safety Approvals

Safety Approvals UL TUV
Housing N/A N/A

D. Environmental Specification

Item Specification / Condition
Operating Temp. Range -10 ℃ to +70 ℃ at humidity 65%+/-20% RH.
Storage Temperature All function shall be normal after 500 hours storage at -40℃ to
+70 ℃ with a 24 hour recovery period at room temperature
Humidity Test After 96 hours, 95% RH, 40+/-2°C per MIL-STD-202F, method 103B
humidity test, the measured data on insulation resistance and dielectric
strength shall meet the specification.
Thermal Shock Per MIL-STD 202F Method 107D, Condition D
Insulation Shock Class A

E. Electrical Specification

Item Specification / Condition
Insulation Resistance 10MΩ/Between unshielded wire and frame at 500 VDCmin
Dielectric Strength 5mA Max./Measured bw lead wire (+) and frame at 500 VACmin
Motor Safety Protection Open circuit when VCC&GND are exchanged
Circuit won’t be burned within 5seconds when VCC&GND are exchanged
Locked rotor Protection Built-in controller will begin to motivate the fan motor to get it start rotating again
when the fan speed suddenly drops to zero in a stuck state
Introducing the IPowertower™ fully integrated TEG Charging SYSTEM (all you add is water and fuel)
¤