- You cannot add "DC to DC Converters" to the cart because the product is out of stock.
Low power high Air Flow Fans
24.50 USD
Product Description
A. General Specification
Item | Specification | Condition |
---|---|---|
Model No. | D12025V12XLB-A | |
Outline Dimension | 120 x 120 x 25 mm | |
Rated Voltage | DC 12 V | |
Operating Voltage Range | DC 10.8 ~13.2 V | |
Start Voltage | DC 7 V | |
Rated Current | 0.11(Max0.13) A +10% | At Rated Voltage,25°C, 65% RH, Free Air |
Power Consumption | 1.32(Max1.56) W +10% | |
Rotating Speed | 1500 RPM ±10% | |
Max. Airflow | 57.2 CFM1.618 m3/min | At Rated Voltage AMCA 210 Standard At Rated Current |
Max. Static Pressure | 1.879 mmH2O 0.074 inchH2O |
|
Noise Level | 27.2(Max 31.2) dB(A) | At Rated Voltage Measured in a non-echo Chamber CNS 8753 Standard ISO 3744 Test Condition |
Life | 50000 hrs at 25°C | MTTF (Mean Time To Failures) at Confidence. Level 90% |
No. of Blade | 7 Blades | |
No. of Pole | 4 Poles | |
Rotating Direction | Clockwise View From Label Side | |
Weight | 156 g | |
Motor Type | DC Brushless Fan Motor | |
Speed Control | N/A | |
Signal Output | N/A |
B. Main Materials / Parts Specification
Materials / Parts | Specification |
---|---|
Housing | Thermoplastic PBT, UL94V-0 |
Blade, Bobbin | Thermoplastic PBT, UL94V-0 |
Bearing | Ball Bearing |
Termination | Lead Wires (+)Red, (-)Black, UL1007 AWG#24 Length:300± 10mm |
Connector | N/A |
C. Safety Approvals
Safety Approvals | UL | TUV |
---|---|---|
Housing | N/A | N/A |
D. Environmental Specification
Item | Specification / Condition |
---|---|
Operating Temp. Range | -10 ℃ to +70 ℃ at humidity 65%+/-20% RH. |
Storage Temperature | All function shall be normal after 500 hours storage at -40℃ to +70 ℃ with a 24 hour recovery period at room temperature |
Humidity Test | After 96 hours, 95% RH, 40+/-2°C per MIL-STD-202F, method 103B humidity test, the measured data on insulation resistance and dielectric strength shall meet the specification. |
Thermal Shock | Per MIL-STD 202F Method 107D, Condition D |
Insulation Shock | Class A |
E. Electrical Specification
Item | Specification / Condition |
---|---|
Insulation Resistance | 10MΩ/Between unshielded wire and frame at 500 VDCmin |
Dielectric Strength | 5mA Max./Measured bw lead wire (+) and frame at 500 VACmin |
Motor Safety Protection | Open circuit when VCC&GND are exchanged |
Circuit won’t be burned within 5seconds when VCC&GND are exchanged | |
Locked rotor Protection | Built-in controller will begin to motivate the fan motor to get it start rotating again when the fan speed suddenly drops to zero in a stuck state |