WHALEFIN6-40mm LIQUID SINK

Product Description

Feature: WHALEFIN6-40mm LIQUID SINK

• All Aluminum construction
• ½” ID 5/8” OD barbed fittings for both in port & out port.
• Mate to a ½” ID silicon tube for best results with 3/16” wall thickness.(recommended)
• Low flow low pressure drop design.
• Flow rates 1.5 to 2 liters  per minute with slight back pressure
• Optimal flow rate is 1.8 liters per minute.
• All flow is in parallel NO serial flow.

TRIPLE DECKER DESIGN BELOW

Populated with 6 pieces of 40 x 40mm recommended modules or 12 pieces Triple Decker design:

Any of the below Part numbers can be used:

TEG1-12610-5.1    TEG1-4199-5.3    TEG1-12610-4.3    TEG1-07025HT-SS  TEG1B-12610-5.1

Special order:  TEG1-PB-07010-6.0