TEG10W stove top TEG Generator

TEG10W stove top TEG Generator

199.00 USD

For More Details

TEG10W stove top TEG Generatorpdf

SKU: teg10w -stove-top Category:

Product Description

The TEG10W stove top TEG Generator is a small convenient lightweight generator, weighting only (5.3 lbs.) 2.4 Kg. The units nominal power output is 10 watts. The connector output comes with standard Alligator clips to charge a 12V battery. It is factory set at 14.4V bulk charging. The Base plate should always be placed on open flame or a very hot wood stove to run small 12VDC loads. If on a WOODSTOVE only AFTER IT IS very HOT, SO YOU SHOCK THE HOT SIDE AND CREATE A RAPID DELTA TEMPERATURE. IF YOU DO NOT THE HEAT WILL TRANSFER SLOWLY TO BOTH HOT & COLD SIDE ELIMINATING ANY DT. Greater power is produced when you have a direct flame on the hot side plate (preferred method for best results!). The surface of a stove interrupts heat flow thereby heat flow to the modules which in turn limits power production! Direct flame is always preferred!! Instruction:

TEG10W-Specification-and-instructions-for-use-Flat-plate

The TEG10W stove top TEG Generator is a small convenient lightweight generator, weighting only (4.3 lbs.) 2 Kg. The units nominal power output is 10 watts. The connector output comes with a standard 12VDC car lighter adapter as well as a USB connector rated 5 VDC @ 500 ma for charging any standard mobile phone or rechargeable battery pack.

Removing the base plate allows the TEG to be placed on woodstoves for indoor lighting and powering any 12VDC load. ALWAYS PLACE ON WOODSTOVE AFTER IT IS HOT SO, YOU SHOCK THE HOT SIDE AND CREATE A RAPID DELTA TEMPERATURE. IF YOU DO NOT THE HEAT WILL TRANSFER SLOWLY TO BOTH HOT & COLD SIDE ELIMINATING ANY DT.

You may also like…